I/O clustering in design cost and performance optimization for flip-chip design
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2556 | en_US |
dc.citation.issue |
11 | en_US |
dc.citation.spage |
2552 | en_US |
dc.citation.volume |
25 | en_US |
dc.citation.woscount |
2 | |
dc.contributor.author |
Chen, Hung-Ming | en_US |
dc.contributor.author |
Liu, I-Min | en_US |
dc.contributor.author |
Wong, Martin D. F. | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:15:33Z | |
dc.date.available |
2014-12-08T15:15:33Z | |
dc.date.issued |
2006-11-01 | en_US |
dc.description.abstract |
Input-output (I/O) placement has always been a concern in modern integrated circuit design. Due to flip-chip technology, I/O can be placed throughout the whole chip without long wires from the periphery of the chip. However, because of I/O placement constraints in design cost (DC) and performance, I/O buffer planning becomes a pressing problem. During the early stages of circuits and package co-design, I/O layout should be evaluated to optimize DC and to avoid product failures. The objective of this brief is to improve the existing/initial standard cell placement by I/O clustering, considering DC reduction and signal integrity preservation. The authors formulate it as a minimum cost flow problem that minimizes alpha W+beta D, where W is the I/O wirelength of the placement and D is the total voltage drop in the power network and, at the same time, reduces the number of I/O buffer blocks. The experimental results on some Microelectronics Center of North Carolina benchmarks show that the author's method averagely achieves better timing performance and over 32% DC reduction when compared with a conventional rule-of-thumb design that is popularly used by circuit designers. | en_US |
dc.identifier.doi |
10.1109/TCAD.2006.873900 | en_US |
dc.identifier.issn |
0278-0070 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TCAD.2006.873900 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/11642 | |
dc.identifier.wosnumber |
WOS:000241567000021 | |
dc.language.iso |
en_US | en_US |
dc.subject |
chip-package co-design | en_US |
dc.subject |
flip-chip design | en_US |
dc.subject |
input-output (I/O) planning | en_US |
dc.subject |
signal integrity | en_US |
dc.title |
I/O clustering in design cost and performance optimization for flip-chip design | en_US |
dc.type |
Article | en_US |
檔案
- 000241567000021.pdf (350.3 KB, Adobe PDF)
所屬典藏: 期刊論文