Synthesis and photoluminescent properties of wurtzite ZnS nanorods by hydrothermal and co-precipitation methods
檔案
- 000242273100010.pdf (447.7 KB, Adobe PDF)
日期
2006-11-01
類型
系所
期刊名稱
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN
卷期與頁次
第 114 卷第 1335 期,頁 918–922
ISSN
0914-5400
語言
英文
摘要
Nanorods of wurtzite ZnS were synthesized by a hydrothermal method at 200 degrees C and a co-precipitation method at room temperature in the presence of ethylenediamine (en) aqueous solutions. It was found that the wurtzite ZnS nanorods with uniform diameter around 80 +/- 20 nm, length about 300 +/- 100 nanometer appears at a proper concentration of en, unit [Zn] : [S] ratio, and an appropriate duration by the hydrothermal method. Much longer wurtzite ZnS nanorods with length from 300 to 2000 nm and diameter from 80 to 200 nm were obtained via the co-precipitation method. A very minor undecomposed ZnS center dot 0.5en phase coexisted with the wurtzite ZnS nanorods in the co-precipitation method was identified and arguably thought to be due to the low temperature used. ZnO coated ZnS core-shell structures were successfully fabricated by annealing the ZnS nanorods in an oxygen flow at 650 degrees C for 3-5 min. The coating of ZnO layer on ZnS nanorods results in a significant increase of photoluminescence (PL) intensity (30 times) at 490-500 nm visible regions for those of hydrothermal method and mild increase (double) for those of co-precipitation method.
所屬典藏
期刊論文引用此條目
Kuo, P.-C., Wang, H.-W., & Chen, S.-Y. (2006). Synthesis and photoluminescent properties of wurtzite ZnS nanorods by hydrothermal and co-precipitation methods. JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 114(1335), 918–922. https://ir.lib.nycu.edu.tw/handle/11536/11648
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/11648