An optical lever approach to photodetector measurements of the pickup-head flying height in an optical disk drive
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2342 | en_US |
dc.citation.issue |
8 | en_US |
dc.citation.spage |
2335 | en_US |
dc.citation.volume |
17 | en_US |
dc.citation.woscount |
2 | |
dc.contributor.author |
Hsiao, C. C. | en_US |
dc.contributor.author |
Peng, C. Y. | en_US |
dc.contributor.author |
Liu, T. S. | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:16:08Z | |
dc.date.available |
2014-12-08T15:16:08Z | |
dc.date.issued |
2006-08-01 | en_US |
dc.description.abstract |
In order to increase the storage capacity and the density of near-field optical disk drives, a flying pickup-head has to allow a slider to fly at a stable height above the disk surface with the use of near-field optics. Since both the precision of the track pitch and the flying height are of a nanometre scale, it is necessary to increase the motion accuracy of the pickup- head. In this study, a piezoelectric bender is used as an actuator of the pickup- head, and two quadrant photodetectors are used to sense the pickup- head displacement and the rotating disk deformation. Based on an optical lever method that magnifies a small displacement, the flying height variation of the pickup- head above the disk is measured. Further results show that using the proposed measurement method in the real-time control of flying height is feasible. | en_US |
dc.identifier.doi |
10.1088/0957-0233/17/8/040 | en_US |
dc.identifier.issn |
0957-0233 | en_US |
dc.identifier.journal |
MEASUREMENT SCIENCE & TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1088/0957-0233/17/8/040 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/11974 | |
dc.identifier.wosnumber |
WOS:000239774300042 | |
dc.language.iso |
en_US | en_US |
dc.subject |
optical lever | en_US |
dc.subject |
photodetector | en_US |
dc.subject |
pickup-head | en_US |
dc.subject |
disk drive | en_US |
dc.title |
An optical lever approach to photodetector measurements of the pickup-head flying height in an optical disk drive | en_US |
dc.type |
Article | en_US |
檔案
- 000239774300042.pdf (482.6 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Hsiao, C. C., Peng, C. Y., & Liu, T. S. (2006). An optical lever approach to photodetector measurements of the pickup-head flying height in an optical disk drive. MEASUREMENT SCIENCE & TECHNOLOGY, 17(8), 2335–2342. https://doi.org/10.1088/0957-0233/17/8/040
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/11974