An optical lever approach to photodetector measurements of the pickup-head flying height in an optical disk drive

檔案

日期

2006-08-01

類型

期刊名稱

MEASUREMENT SCIENCE & TECHNOLOGY

卷期與頁次

第 17 卷第 8 期,頁 2335–2342

ISSN

0957-0233

語言

英文

摘要

In order to increase the storage capacity and the density of near-field optical disk drives, a flying pickup-head has to allow a slider to fly at a stable height above the disk surface with the use of near-field optics. Since both the precision of the track pitch and the flying height are of a nanometre scale, it is necessary to increase the motion accuracy of the pickup- head. In this study, a piezoelectric bender is used as an actuator of the pickup- head, and two quadrant photodetectors are used to sense the pickup- head displacement and the rotating disk deformation. Based on an optical lever method that magnifies a small displacement, the flying height variation of the pickup- head above the disk is measured. Further results show that using the proposed measurement method in the real-time control of flying height is feasible.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Hsiao, C. C., Peng, C. Y., & Liu, T. S. (2006). An optical lever approach to photodetector measurements of the pickup-head flying height in an optical disk drive. MEASUREMENT SCIENCE & TECHNOLOGY, 17(8), 2335–2342. https://doi.org/10.1088/0957-0233/17/8/040

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/11974