Improved Output Power of InGaN-Based Ultraviolet LEDs Using a Heavily Si-Doped GaN Insertion Layer Technique
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
181 | en_US |
dc.citation.spage |
175 | en_US |
dc.citation.volume |
48 | en_US |
dc.citation.woscount |
1 | en_US |
dc.contributor.author |
Chiu, Ching-Hsueh | en_US |
dc.contributor.author |
Lin, Chien-Chung | en_US |
dc.contributor.author |
Tu, Po-Min | en_US |
dc.contributor.author |
Huang, Shih-Cheng | en_US |
dc.contributor.author |
Tu, Chia-Cheng | en_US |
dc.contributor.author |
Li, Jin-Chai | en_US |
dc.contributor.author |
Li, Zhen-Yu | en_US |
dc.contributor.author |
Uen, Wu-Yih | en_US |
dc.contributor.author |
Zan, Hsiao-Wen | en_US |
dc.contributor.author |
Lu, Tien-Chang | en_US |
dc.contributor.author |
Kuo, Hao-Chung | en_US |
dc.contributor.author |
Wang, Shing-Chung | en_US |
dc.contributor.author |
Chang, Chun-Yen | en_US |
dc.contributor.department |
光電系統研究所 | zh_TW |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
光電工程學系 | zh_TW |
dc.contributor.department |
Institute of Photonic System | en_US |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.contributor.department |
Department of Photonics | en_US |
dc.date.accessioned |
2015-07-21T08:28:22Z | |
dc.date.available |
2015-07-21T08:28:22Z | |
dc.date.issued |
2012-02-01 | en_US |
dc.description.abstract |
In this paper, a high quality ultraviolet lightemitting diodes (UV-LEDs) at 375 nm was developed using a heavy Si-doping technique with metal organic chemical vapor deposition. By using high-resolution X-ray diffraction, the full width at half-maximum of the rocking curve shows that the GaN film inserting a heavily Si-doped GaN layer (Si-HDL) had high crystalline quality. From the transmission electron microscopy image, the threading dislocation density was decreased after inserting a Si-HDL between undoped and n-doped GaN layers by nanoscale epitaxial lateral overgrowth. As a result, a much smaller reverse current and a higher light output were achieved. The improvement of light output at an injection current of 20 mA was enhanced by 40%. Therefore, we can use an in-situ nano pattern without complex photolithography and etching process and improve the internal quantum efficiency of UV-LEDs. | en_US |
dc.identifier.doi |
10.1109/JQE.2011.2170553 | en_US |
dc.identifier.issn |
0018-9197 | en_US |
dc.identifier.journal |
IEEE JOURNAL OF QUANTUM ELECTRONICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/JQE.2011.2170553 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/124610 | |
dc.identifier.wosnumber |
WOS:000299429100025 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Internal quantum efficiency | en_US |
dc.subject |
metal-organic chemical vapor deposition | en_US |
dc.subject |
nanoscale epitaxial lateral overgrowth | en_US |
dc.subject |
ultraviolet light emitting diodes | en_US |
dc.title |
Improved Output Power of InGaN-Based Ultraviolet LEDs Using a Heavily Si-Doped GaN Insertion Layer Technique | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Chiu, C.-H., Lin, C.-C., Tu, P.-M., Huang, S.-C., Tu, C.-C., Li, J.-C., Li, Z.-Y., Uen, W.-Y., Zan, H.-W., Lu, T.-C., Kuo, H.-C., Wang, S.-C., & Chang, C.-Y. (2012). Improved Output Power of InGaN-Based Ultraviolet LEDs Using a Heavily Si-Doped GaN Insertion Layer Technique. IEEE JOURNAL OF QUANTUM ELECTRONICS, 48, 175–181. https://doi.org/10.1109/JQE.2011.2170553
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/124610