Large-area organic solar cells by accelerated blade coating
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
172 | en_US |
dc.citation.spage |
166 | en_US |
dc.citation.volume |
22 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Tsai, Pei-Ting | en_US |
dc.contributor.author |
Yu, Kai-Chieh | en_US |
dc.contributor.author |
Chang, Chia-Ju | en_US |
dc.contributor.author |
Horng, Sheng-Fu | en_US |
dc.contributor.author |
Meng, Hsin-Fei | en_US |
dc.contributor.department |
物理研究所 | zh_TW |
dc.contributor.department |
Institute of Physics | en_US |
dc.date.accessioned |
2015-07-21T08:29:44Z | |
dc.date.available |
2015-07-21T08:29:44Z | |
dc.date.issued |
2015-07-01 | en_US |
dc.description.abstract |
Large-area photovoltaic devices have been fabricated using the blade coating technique. In this study, the use of accelerated blade motion in this technique significantly improved the thickness uniformity of blade-coated layers of polymer solar cells on an A4 glass substrate. Two types of active layers, P3HT: PC61BM and POD2T-DTBT: PC71BM, were studied. For the P3HT: PC61BM film, a thickness of 221 +/- 14 nm was realised in a 12 x 15 cm(2) active region with a coating blade acceleration of 8 mm/s(2). For the POD2T-DTBT: PC71BM film, a thickness of 98 +/- 6 nm was realised with a coating blade acceleration of 10 mm/s(2). Ten cells, each measuring 0.9 cm x 12 cm and monolithically fabricated, were connected in series, yielding a total active area of 108 cm(2). The power conversion efficiency of the resulting 10-cell module was 2.66% and 3.64% for P3HT: PC61BM and POD2T-DTBT: PC71BM, respectively. The blade coating technique involving the accelerated blade motion is therefore useful for fabricating low-cost large-area organic solar cells, and it may be a promising alternative for the commercialisation of organic solar cells. (C) 2015 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.orgel.2015.03.001 | en_US |
dc.identifier.issn |
1566-1199 | en_US |
dc.identifier.journal |
ORGANIC ELECTRONICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.orgel.2015.03.001 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/124626 | |
dc.identifier.wosnumber |
WOS:000353334800027 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Large-area | en_US |
dc.subject |
Organic solar cells | en_US |
dc.subject |
Acceleration | en_US |
dc.subject |
Blade coating | en_US |
dc.title |
Large-area organic solar cells by accelerated blade coating | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Tsai, P.-T., Yu, K.-C., Chang, C.-J., Horng, S.-F., & Meng, H.-F. (2015). Large-area organic solar cells by accelerated blade coating. ORGANIC ELECTRONICS, 22, 166–172. https://doi.org/10.1016/j.orgel.2015.03.001
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/124626