Large-area organic solar cells by accelerated blade coating

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2015-07-01

類型

期刊名稱

ORGANIC ELECTRONICS

卷期與頁次

第 22 卷,頁 166–172

ISSN

1566-1199

語言

英文

摘要

Large-area photovoltaic devices have been fabricated using the blade coating technique. In this study, the use of accelerated blade motion in this technique significantly improved the thickness uniformity of blade-coated layers of polymer solar cells on an A4 glass substrate. Two types of active layers, P3HT: PC61BM and POD2T-DTBT: PC71BM, were studied. For the P3HT: PC61BM film, a thickness of 221 +/- 14 nm was realised in a 12 x 15 cm(2) active region with a coating blade acceleration of 8 mm/s(2). For the POD2T-DTBT: PC71BM film, a thickness of 98 +/- 6 nm was realised with a coating blade acceleration of 10 mm/s(2). Ten cells, each measuring 0.9 cm x 12 cm and monolithically fabricated, were connected in series, yielding a total active area of 108 cm(2). The power conversion efficiency of the resulting 10-cell module was 2.66% and 3.64% for P3HT: PC61BM and POD2T-DTBT: PC71BM, respectively. The blade coating technique involving the accelerated blade motion is therefore useful for fabricating low-cost large-area organic solar cells, and it may be a promising alternative for the commercialisation of organic solar cells. (C) 2015 Elsevier B.V. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Tsai, P.-T., Yu, K.-C., Chang, C.-J., Horng, S.-F., & Meng, H.-F. (2015). Large-area organic solar cells by accelerated blade coating. ORGANIC ELECTRONICS, 22, 166–172. https://doi.org/10.1016/j.orgel.2015.03.001

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/124626