Fabrication of pure aluminum nanowires by using injection molding process in ambient air

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2015-06-01

類型

期刊名稱

MATERIALS LETTERS

卷期與頁次

第 148 卷,頁 30–33

ISSN

0167-577X

語言

英文

摘要

A simple method to prepare aluminum nanowires was achieved by using the injection molding process in the air. The Al nanowires were made with the average diameter of 60 nm and length of several micrometers. The difference between mold dimension and nanowires was caused by removing the outer oxide shell of Al nanowires. XRD, EDS and SAED results showed that the Al crystalline nanowires were fabricated exactly. The proposed concept successfully established a simple and low-cost method to have high-temperature and soft nano-materials under the non-vacuum surroundings. (C) 2015 Elsevier B.V. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Chen, S.-H., Wang, C.-Y., Chen, Y.-C., Hun, C.-W., Chen, S.-F., & Yang, S.-M. (2015). Fabrication of pure aluminum nanowires by using injection molding process in ambient air. MATERIALS LETTERS, 148, 30–33. https://doi.org/10.1016/j.matlet.2015.02.082

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/124636