Investigation of overpotential and seed thickness on damascene copper electroplating
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
3116 | en_US |
dc.citation.issue |
10 | en_US |
dc.citation.spage |
3112 | en_US |
dc.citation.volume |
200 | en_US |
dc.contributor.author |
Chen, KW | en_US |
dc.contributor.author |
Wang, YL | en_US |
dc.contributor.author |
Chang, L | en_US |
dc.contributor.author |
Li, FY | en_US |
dc.contributor.author |
Chang, SC | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:17:21Z | |
dc.date.available |
2014-12-08T15:17:21Z | |
dc.date.issued |
2006-02-24 | en_US |
dc.description.abstract |
This study found that higher overpotential from higher plating current density and a thinner seed layer resulted in more incorporation of sulfur impurities into a deposited copper film. Our results suggested that the higher plating overpotential resulted in smaller copper grains with more grain boundaries where more impurities were trapped. To achieve a defect-free filling in vias, the optimization of the plating current density and the seed layer thickness was necessary. A copper seed with thickness less than 30 generated a sulfur-rich copper film, while, thickness larger than 200 nm for 0.13-nm technologies, the copper seed led to a poor gapfilling with a void after electroplating. (c) 2005 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.surfcoat.2005.07.007 | en_US |
dc.identifier.issn |
0257-8972 | en_US |
dc.identifier.journal |
SURFACE & COATINGS TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.surfcoat.2005.07.007 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/12608 | |
dc.identifier.wosnumber |
WOS:000235427000003 | |
dc.language.iso |
en_US | en_US |
dc.subject |
copper electroplating | en_US |
dc.subject |
plating current density | en_US |
dc.subject |
overpotential | en_US |
dc.subject |
copper seed layer | en_US |
dc.title |
Investigation of overpotential and seed thickness on damascene copper electroplating | en_US |
dc.type |
Article; Proceedings Paper | en_US |
檔案
- 000235427000003.pdf (164.8 KB, Adobe PDF)
所屬典藏: 會議論文
引用此條目
Chen, K., Wang, Y., Chang, L., Li, F., & Chang, S. (2006). Investigation of overpotential and seed thickness on damascene copper electroplating. SURFACE & COATINGS TECHNOLOGY, 200(10), 3112–3116. https://doi.org/10.1016/j.surfcoat.2005.07.007
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/12608