Interfacial Reaction Between Eutectic Sn-Pb Solder and Electroplated-Ni as well as Electroless-Ni Metallization During Reflow
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
344 | en_US |
dc.citation.issue |
2 | en_US |
dc.citation.spage |
338 | en_US |
dc.citation.volume |
38 | en_US |
dc.contributor.author |
Chen, Hsiao-Yun | en_US |
dc.contributor.author |
Chen, Chih | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:17:35Z | |
dc.date.available |
2014-12-08T15:17:35Z | |
dc.date.issued |
2009-02-01 | en_US |
dc.description.abstract |
Electroplated-Ni (EP-Ni) has been adopted gradually as an underbump metallization layer due to its comparatively lower resistivity and higher deposition rate. In this study, the metallurgical reaction between eutectic Sn-Pb solder and EP-Ni as well as electroless-Ni (EL-Ni) was investigated at 200A degrees C, 210A degrees C, 220A degrees C, and 240A degrees C. It is found that the growth rate of Ni(3)Sn(4) intermetallic compound (IMC) on EP-Ni was slower than that on EL-Ni. The consumption rate is measured to be 0.97 x 10(-3) mu m/s and 1.48 x 10(-3) mu m/s for EP-Ni and EL-Ni, respectively. The activation energy is determined to be 51 kJ/mol and 48 kJ/mol for EP-Ni and EL-Ni, respectively. The dense structure of EP-Ni may be responsible for the lower IMC formation rate. | en_US |
dc.identifier.doi |
10.1007/s11664-008-0580-7 | en_US |
dc.identifier.issn |
0361-5235 | en_US |
dc.identifier.journal |
JOURNAL OF ELECTRONIC MATERIALS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1007/s11664-008-0580-7 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/12756 | |
dc.identifier.wosnumber |
WOS:000262482200016 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Flip-chip solder joints | en_US |
dc.subject |
electronic packaging | en_US |
dc.subject |
electroplated Ni | en_US |
dc.title |
Interfacial Reaction Between Eutectic Sn-Pb Solder and Electroplated-Ni as well as Electroless-Ni Metallization During Reflow | en_US |
dc.type |
Article; Proceedings Paper | en_US |
檔案
- 000262482200016.pdf (673.0 KB, Adobe PDF)
所屬典藏: 會議論文
引用此條目
Chen, H.-Y., & Chen, C. (2009). Interfacial Reaction Between Eutectic Sn-Pb Solder and Electroplated-Ni as well as Electroless-Ni Metallization During Reflow. JOURNAL OF ELECTRONIC MATERIALS, 38(2), 338–344. https://doi.org/10.1007/s11664-008-0580-7
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/12756