Interfacial Reaction Between Eutectic Sn-Pb Solder and Electroplated-Ni as well as Electroless-Ni Metallization During Reflow
檔案
- 000262482200016.pdf (673.0 KB, Adobe PDF)
日期
2009-02-01
系所
期刊名稱
JOURNAL OF ELECTRONIC MATERIALS
卷期與頁次
第 38 卷第 2 期,頁 338–344
ISSN
0361-5235
語言
英文
摘要
Electroplated-Ni (EP-Ni) has been adopted gradually as an underbump metallization layer due to its comparatively lower resistivity and higher deposition rate. In this study, the metallurgical reaction between eutectic Sn-Pb solder and EP-Ni as well as electroless-Ni (EL-Ni) was investigated at 200A degrees C, 210A degrees C, 220A degrees C, and 240A degrees C. It is found that the growth rate of Ni(3)Sn(4) intermetallic compound (IMC) on EP-Ni was slower than that on EL-Ni. The consumption rate is measured to be 0.97 x 10(-3) mu m/s and 1.48 x 10(-3) mu m/s for EP-Ni and EL-Ni, respectively. The activation energy is determined to be 51 kJ/mol and 48 kJ/mol for EP-Ni and EL-Ni, respectively. The dense structure of EP-Ni may be responsible for the lower IMC formation rate.
所屬典藏
會議論文引用此條目
Chen, H.-Y., & Chen, C. (2009). Interfacial Reaction Between Eutectic Sn-Pb Solder and Electroplated-Ni as well as Electroless-Ni Metallization During Reflow. JOURNAL OF ELECTRONIC MATERIALS, 38(2), 338–344. https://doi.org/10.1007/s11664-008-0580-7
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/12756