Effects of Ni thickness and reflow times on interfacial reactions between Ni/Cu under-bump metallization and eutectic Sn-Pb solder in flip-chip technology

檔案

日期

2003-02-01

類型

期刊名稱

JOURNAL OF ELECTRONIC MATERIALS

卷期與頁次

第 32 卷第 2 期,頁 89–94

ISSN

0361-5235

語言

英文

摘要

Flip-chip interconnection technology plays a key role in today's electronics packaging. Understanding the interfacial reactions between the solder and under-bump metallization (UBM) is, thus, essential. In this study, different thicknesses of electroplated Ni were used to evaluate the phase transformation between Ni/Cu under-bump metallurgy and eutectic Sn-Pb solder in the 63Sn-37Pb/Ni/Cu/Ti/Si3N4/Si multilayer structure for the flip-chip technology. Interfacial reaction products varied with reflow times. After the first reflow, layered (Ni1-x,Cu-x)(3)Sn-4 was found between solder and Ni. However, there were two interfacial reaction products formed between solders and the UBM after three or more times reflow. The layered (Ni1-xCux)(3)Sn-4 was next to the Ni/Cu UBM. The islandlike (Cu1-y,Ni-y)(6)Sn-5 was formed between (Ni,Cu)(3)Sn-4 and solders. The amounts of (Cu1-y,Ni-y)(6)Sn-5 intermetallic compound (IMC) could be related to the Ni thickness and reflow times. In addition, the influence of Cu contents on phase transformation during reflow was also studied.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Huang, C., Duh, J., Chen, Y., & Wang, J. (2003). Effects of Ni thickness and reflow times on interfacial reactions between Ni/Cu under-bump metallization and eutectic Sn-Pb solder in flip-chip technology. JOURNAL OF ELECTRONIC MATERIALS, 32(2), 89–94. https://ir.lib.nycu.edu.tw/handle/11536/28122

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/28122