Parameter optimization and design aspect for electrocoagulation of silica nano-particles in wafer polishing wastewater
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
194 | en_US |
dc.citation.issue |
6 | en_US |
dc.citation.spage |
187 | en_US |
dc.citation.volume |
53 | en_US |
dc.contributor.author |
Den, W | en_US |
dc.contributor.author |
Huang, C | en_US |
dc.contributor.department |
環境工程研究所 | zh_TW |
dc.contributor.department |
Institute of Environmental Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:17:37Z | |
dc.date.available |
2014-12-08T15:17:37Z | |
dc.date.issued |
2006 | en_US |
dc.description.abstract |
A systematic procedure has been proposed for the design of a multi-channel, continuous-flow electrocoagulation reactor of mono-polar configuration for the removal of sub-micron particles from wastewater. Using the chemical-mechanical-planarization (CMP) process as the target source of wastewater, a series of laboratory-scale studies were conducted to determine the required operating conditions for the efficient removal of the ultrafine particles. These operating criteria included charge loading ( >= 8 F m(-3)), current density ( >= 5.7 A m(-2)), hydraulic retention time ( >= 60 min), as well as the initially operational pH (7 similar to 10). Furthermore, a steady-state transport equation with second-order reaction kinetics was employed to describe the rate of coagulation as the rate-limiting factor, The actual kinetic constant determined from the laboratory-scale experiments was approximately 1.2 x 10(-21) m(3) s(-1), which was three orders of magnitude smaller than that calculated based on Brownian diffusion during the coagulation. The model was subsequently validated with a series of experiments using a pilot-scale electro-coagulation reactor geometrically similar to the laboratory-scale reactor with nearly twenty times volumetric scale-up. | en_US |
dc.identifier.doi |
10.2166/wst.2006.195 | en_US |
dc.identifier.issn |
0273-1223 | en_US |
dc.identifier.journal |
WATER SCIENCE AND TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.2166/wst.2006.195 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/12777 | |
dc.identifier.wosnumber |
WOS:000238143000027 | |
dc.language.iso |
en_US | en_US |
dc.subject |
CMP | en_US |
dc.subject |
electrocoagulation | en_US |
dc.subject |
nano-particle | en_US |
dc.subject |
silica colloids | en_US |
dc.subject |
slurry | en_US |
dc.subject |
wafer polishing | en_US |
dc.title |
Parameter optimization and design aspect for electrocoagulation of silica nano-particles in wafer polishing wastewater | en_US |
dc.type |
Article; Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Den, W., & Huang, C. (2006). Parameter optimization and design aspect for electrocoagulation of silica nano-particles in wafer polishing wastewater. WATER SCIENCE AND TECHNOLOGY, 53(6), 187–194. https://doi.org/10.2166/wst.2006.195
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/12777