Design, Fabrication and Characterization of Low-Noise and High-Reliability Amorphous Silicon Gate Driver Circuit for Advanced FPD Applications

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2015-08-01

類型

期刊名稱

JOURNAL OF DISPLAY TECHNOLOGY

卷期與頁次

第 11 卷,頁 633–639

ISSN

1551-319X

語言

英文

摘要

We report a novel design of amorphous silicon gate (ASG) driver circuit with not only low output noises but also improved reliability. The ASG circuits are made of thin-film transistors (TFTs) and integrated in the substrate glass. Unlike the most traditional ASG circuits, the proposed pull-down signals are complementary with lower frequency to discharge the critical nodes in the proposed circuit. The new pull-down signals are created to discharge each two adjacent stage circuits. By inputting two controlled pulse signals, the prospective pull-down signals can be created eventually in the circuit. To simulate the real driving conditions, a string of a resistance (1.24 k Omega) and a capacitance (85.5 pF) are connected to each output as loading. By probing the output pads of the real circuit sample, the output characteristics can practicably be measured. In particular, the output ripples can be suppressed to 0.28 V. Moreover, the measured threshold voltage (V-th)shift with two stressing signals at different frequencies reveals the significant difference. The measured V-th shift after 12 h of the clock stressing with lower frequency (167 Hz) is about 12% slower speed than that of the stressing clock with higher frequency (16.7 kHz) under the high temperature (60 degrees C).

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Chiang, C.-H., & Li, Y. (2015). Design, Fabrication and Characterization of Low-Noise and High-Reliability Amorphous Silicon Gate Driver Circuit for Advanced FPD Applications. JOURNAL OF DISPLAY TECHNOLOGY, 11, 633–639. https://doi.org/10.1109/JDT.2014.2387880

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/127996