A Fully-Integrated Wireless Bondwire Accelerometer With Closed-loop Readout Architecture
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2453 | en_US |
dc.citation.issue |
10 | en_US |
dc.citation.spage |
2445 | en_US |
dc.citation.volume |
62 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Liao, Yu-Te | en_US |
dc.contributor.author |
Huang, Shih-Chieh | en_US |
dc.contributor.author |
Cheng, Fu-Yuan | en_US |
dc.contributor.author |
Tsai, Tsung-Heng | en_US |
dc.contributor.department |
電機資訊學士班 | zh_TW |
dc.contributor.department |
Undergraduate Honors Program of Electrical Engineering and Computer Science | en_US |
dc.date.accessioned |
2015-12-02T02:59:29Z | |
dc.date.available |
2015-12-02T02:59:29Z | |
dc.date.issued |
2015-10-01 | en_US |
dc.description.abstract |
This paper presents a fully-integrated wireless bondwire accelerometer using a closed-loop readout interface that effectively reduces the noise from electrical circuits and long-term frequency drifts. The proposed accelerometer was fabricated using 0.18-mu m CMOS technology without micro electromechanical systems (MEMS) processing. To reduce manufacturing errors, the bondwire inertial sensors are wire-bonded on the chip pads, thereby enabling a precisely-defined length and space between sensing bondwires. The proposed wireless accelerometer using a pair of 15.2 mu m and 25.4 mu m bondwires achieves a linear transducer gain of 33 mV/g, bandwidth of 5 kHz, a noise floor of 700 mu g/root Hz, and 4.5 mu g bias stability. The acceleration data is digitalized by an energy-efficient 10-bit SAR ADC and then wirelessly transmitted in real time to the external reader by a low-power on-off shift keying (OOK) transmitter. The proposed architecture consumes 9 mW and the chip area is 2 mm x 2.4 mm. | en_US |
dc.identifier.doi |
10.1109/TCSI.2015.2471595 | en_US |
dc.identifier.issn |
1549-8328 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TCSI.2015.2471595 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/128257 | |
dc.identifier.wosnumber |
WOS:000362041100008 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Bondwire | en_US |
dc.subject |
CMOS | en_US |
dc.subject |
inertial sensing | en_US |
dc.subject |
resonant accelerometer | en_US |
dc.subject |
wireless accelerometer | en_US |
dc.title |
A Fully-Integrated Wireless Bondwire Accelerometer With Closed-loop Readout Architecture | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Liao, Y.-T., Huang, S.-C., Cheng, F.-Y., & Tsai, T.-H. (2015). A Fully-Integrated Wireless Bondwire Accelerometer With Closed-loop Readout Architecture. IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS, 62(10), 2445–2453. https://doi.org/10.1109/TCSI.2015.2471595
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/128257