Study on the characteristics of a homemade differential-velocity-type compliant joint for robotic manipulators
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
0 | en_US |
dc.citation.issue |
9 | en_US |
dc.citation.spage |
0 | en_US |
dc.citation.volume |
7 | en_US |
dc.citation.woscount |
9 | en_US |
dc.contributor.author |
Hu, Jwu-Sheng | en_US |
dc.contributor.author |
Wu, Cheng-Hua | en_US |
dc.contributor.author |
Tsai, Yi-Jeng | en_US |
dc.contributor.author |
Kuo, Chung-Hsien | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2019-04-03T06:35:36Z | |
dc.date.available |
2019-04-03T06:35:36Z | |
dc.date.issued |
2015-09-01 | en_US |
dc.description.abstract |
Design of a new differential-velocity-type compliant joint with two motors is proposed for robotic manipulators. The speed/output torque of the differential-velocity-type joint is synthesized by controlling the differential speeds of a pair of actuators. Descriptions of the design concept, theoretical analysis, and the experiments are presented in this article. The experimental results showed that (1) the stiffness of the differential-velocity-type joint can be regulated by changing the speeds of both motors, (2) the differential-velocity-type joint actually reduced 7.9%-15.7% time compared with the single-drive joint when performing five cycles of reciprocation, and (3) a new design of delta-type robot with differential-velocity-type driving modules was developed for verification. The experimental results showed that the differential-velocity-type delta robot can perform flexible assembly operations within a 0.028-mm tolerance. | en_US |
dc.identifier.doi |
10.1177/1687814015603668 | en_US |
dc.identifier.issn |
1687-8140 | en_US |
dc.identifier.journal |
ADVANCES IN MECHANICAL ENGINEERING | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1177/1687814015603668 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/128294 | |
dc.identifier.wosnumber |
WOS:000362293200007 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Compliant joint | en_US |
dc.subject |
robot | en_US |
dc.subject |
differential velocity | en_US |
dc.title |
Study on the characteristics of a homemade differential-velocity-type compliant joint for robotic manipulators | en_US |
dc.type |
Article | en_US |
檔案
- 0e06e50c8aa31a9a96826796c20c294f.pdf (7.92 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Hu, J.-S., Wu, C.-H., Tsai, Y.-J., & Kuo, C.-H. (2015). Study on the characteristics of a homemade differential-velocity-type compliant joint for robotic manipulators. ADVANCES IN MECHANICAL ENGINEERING, 7(9), 0. https://doi.org/10.1177/1687814015603668
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/128294