Study on the characteristics of a homemade differential-velocity-type compliant joint for robotic manipulators
檔案
- 0e06e50c8aa31a9a96826796c20c294f.pdf (7.92 MB, Adobe PDF)
日期
2015-09-01
期刊名稱
ADVANCES IN MECHANICAL ENGINEERING
摘要
Design of a new differential-velocity-type compliant joint with two motors is proposed for robotic manipulators. The speed/output torque of the differential-velocity-type joint is synthesized by controlling the differential speeds of a pair of actuators. Descriptions of the design concept, theoretical analysis, and the experiments are presented in this article. The experimental results showed that (1) the stiffness of the differential-velocity-type joint can be regulated by changing the speeds of both motors, (2) the differential-velocity-type joint actually reduced 7.9%-15.7% time compared with the single-drive joint when performing five cycles of reciprocation, and (3) a new design of delta-type robot with differential-velocity-type driving modules was developed for verification. The experimental results showed that the differential-velocity-type delta robot can perform flexible assembly operations within a 0.028-mm tolerance.
所屬典藏
期刊論文引用此條目
Hu, J.-S., Wu, C.-H., Tsai, Y.-J., & Kuo, C.-H. (2015). Study on the characteristics of a homemade differential-velocity-type compliant joint for robotic manipulators. ADVANCES IN MECHANICAL ENGINEERING, 7(9), 0. https://doi.org/10.1177/1687814015603668
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/128294