A parallel coupled-line filter using VLSI backend interconnect with high resistivity substrate
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
105 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
93 | en_US |
dc.citation.volume |
27 | en_US |
dc.citation.woscount |
0 | |
dc.contributor.author |
Chen, C. C. | en_US |
dc.contributor.author |
Kao, H. L. | en_US |
dc.contributor.author |
Chiang, K. C. | en_US |
dc.contributor.author |
Chin, Albert | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:17:50Z | |
dc.date.available |
2014-12-08T15:17:50Z | |
dc.date.issued |
2006-01-01 | en_US |
dc.description.abstract |
This paper reports our progress in developing parallel coupled-line filters based on Si-based VLSI backend interconnects for millimeter-wave applications. The resonant frequency of this coupled-line filter increases with increasing spacing-gap and with increasing IDM thickness. By using high resistivity substrate, the parallel coupled-line band-pass filter is extremely effective in reducing substrate loss, and also provides very low insertion loss, even at the millimeter-wave regime. In addition, the parallel coupled-line filter suitable for advanced system-on-a-chips at the millimeter wave application achieves high performance characteristics, which show low insertion loss, wide band, and compatibility with standard VLSI process. | en_US |
dc.identifier.doi |
10.1007/s10762-006-9051-5 | en_US |
dc.identifier.issn |
0195-9271 | en_US |
dc.identifier.journal |
INTERNATIONAL JOURNAL OF INFRARED AND MILLIMETER WAVES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1007/s10762-006-9051-5 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/12928 | |
dc.identifier.wosnumber |
WOS:000239628600008 | |
dc.language.iso |
en_US | en_US |
dc.subject |
parallel coupled-line filter | en_US |
dc.subject |
VLSI | en_US |
dc.subject |
high resistivity substrate | en_US |
dc.subject |
millimeter-wave | en_US |
dc.title |
A parallel coupled-line filter using VLSI backend interconnect with high resistivity substrate | en_US |
dc.type |
Article | en_US |
檔案
- 000239628600008.pdf (193.0 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Chen, C. C., Kao, H. L., Chiang, K. C., & Chin, A. (2006). A parallel coupled-line filter using VLSI backend interconnect with high resistivity substrate. INTERNATIONAL JOURNAL OF INFRARED AND MILLIMETER WAVES, 27(1), 93–105. https://doi.org/10.1007/s10762-006-9051-5
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/12928