Radiometric Block Adjustment for Multi-Strip Airborne Waveform Lidar Data

檔案

日期

2015-12-01

類型

期刊名稱

REMOTE SENSING

卷期與頁次

第 7 卷第 12 期,頁 16831–16848

ISSN

2072-4292

語言

英文

摘要

The airborne lidar system has been shown to be an effective and reliable method for spatial data collection. Lidar records the coordinates of point and intensity, dependent on range, incident angle, reflectivity of object, atmospheric condition, and several external factors. To fully utilize the intensity of a lidar system, several researchers have proposed correction models from lidar equations. The radiometric correction models are divided into physically-oriented models and data-oriented models. The lidar acquisition often contains multiple flight lines, and the radiation energy of each flight line can be calibrated independently by calibration coefficient. However, the calibrated radiances in the overlapped area have slightly different measurements. These parameters should be implicitly taken into account if calibrating radiances back to reflectance using known calibration targets. This study used a single-strip physically-oriented model to obtain a backscattering coefficient and a data-oriented model to obtain corrected intensity. We then selected homogeneous tie regions in the overlapped areas, and the differences between strips were compensated by gain and offset parameters in multi-strip radiometric block adjustment. The results were evaluated by the radiometric differences. Nine strips were acquired by Rigel Q680i system, and the experimental results showed that the delta intensity and delta backscattering coefficient of tie regions were improved up to 60% after multi-strip block adjustment.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Teo, T.-A., & Wu, H.-M. (2015). Radiometric Block Adjustment for Multi-Strip Airborne Waveform Lidar Data. REMOTE SENSING, 7(12), 16831–16848. https://doi.org/10.3390/rs71215856

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/129545