Formation Mechanism of Porous Cu3Sn Intermetallic Compounds by High Current Stressing at High Temperatures in Low-Bump-Height Solder Joints
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
0 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
0 | en_US |
dc.citation.volume |
6 | en_US |
dc.citation.woscount |
9 | en_US |
dc.contributor.author |
Lin, Jie-An | en_US |
dc.contributor.author |
Lin, Chung-Kuang | en_US |
dc.contributor.author |
Liu, Chen-Min | en_US |
dc.contributor.author |
Huang, Yi-Sa | en_US |
dc.contributor.author |
Chen, Chih | en_US |
dc.contributor.author |
Chu, David T. | en_US |
dc.contributor.author |
Tu, King-Ning | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2019-04-03T06:44:31Z | |
dc.date.available |
2019-04-03T06:44:31Z | |
dc.date.issued |
2016-01-01 | en_US |
dc.description.abstract |
Electromigration tests of SnAg solder bump samples with 15 m bump height and Cu under-bump-metallization (UBM) were performed. The test conditions were 1.45 x 10(4) A/cm(2) at 185 degrees C and 1.20 x 10(4) A/cm(2) at 0 degrees C. A porous Cu3Sn intermetallic compound (IMC) structure was observed to form within the bumps after several hundred hours of current stressing. In direct comparison, annealing alone at 185 degrees C will take more than 1000 h for porous Cu3Sn to form, and it will not form at 170 degrees C even after 2000 h. Here we propose a mechanism to explain the formation of this porous structure assisted by electromigration. The results show that the SnAg bump with low bump height will become porous-type Cu3Sn when stressing with high current density and high temperature. Polarity effects on porous Cu3Sn formation is discussed. | en_US |
dc.identifier.doi |
10.3390/cryst6010012 | en_US |
dc.identifier.issn |
2073-4352 | en_US |
dc.identifier.journal |
CRYSTALS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.3390/cryst6010012 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/129679 | |
dc.identifier.wosnumber |
WOS:000369511700002 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
intermetallic compounds | en_US |
dc.subject |
porous Cu3Sn | en_US |
dc.subject |
electromigration | en_US |
dc.subject |
side wall reaction | en_US |
dc.title |
Formation Mechanism of Porous Cu3Sn Intermetallic Compounds by High Current Stressing at High Temperatures in Low-Bump-Height Solder Joints | en_US |
dc.type |
Article | en_US |
檔案
- b952c6323573ef7e06b9aee8aa384f24.pdf (3.23 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Lin, J.-A., Lin, C.-K., Liu, C.-M., Huang, Y.-S., Chen, C., Chu, D. T., & Tu, K.-N. (2016). Formation Mechanism of Porous Cu3Sn Intermetallic Compounds by High Current Stressing at High Temperatures in Low-Bump-Height Solder Joints. CRYSTALS, 6(1), 0. https://doi.org/10.3390/cryst6010012
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/129679