Formation Mechanism of Porous Cu3Sn Intermetallic Compounds by High Current Stressing at High Temperatures in Low-Bump-Height Solder Joints
檔案
- b952c6323573ef7e06b9aee8aa384f24.pdf (3.23 MB, Adobe PDF)
日期
2016-01-01
類型
系所
期刊名稱
CRYSTALS
卷期與頁次
第 6 卷第 1 期
ISSN
2073-4352
語言
英文
摘要
Electromigration tests of SnAg solder bump samples with 15 m bump height and Cu under-bump-metallization (UBM) were performed. The test conditions were 1.45 x 10(4) A/cm(2) at 185 degrees C and 1.20 x 10(4) A/cm(2) at 0 degrees C. A porous Cu3Sn intermetallic compound (IMC) structure was observed to form within the bumps after several hundred hours of current stressing. In direct comparison, annealing alone at 185 degrees C will take more than 1000 h for porous Cu3Sn to form, and it will not form at 170 degrees C even after 2000 h. Here we propose a mechanism to explain the formation of this porous structure assisted by electromigration. The results show that the SnAg bump with low bump height will become porous-type Cu3Sn when stressing with high current density and high temperature. Polarity effects on porous Cu3Sn formation is discussed.
所屬典藏
期刊論文引用此條目
Lin, J.-A., Lin, C.-K., Liu, C.-M., Huang, Y.-S., Chen, C., Chu, D. T., & Tu, K.-N. (2016). Formation Mechanism of Porous Cu3Sn Intermetallic Compounds by High Current Stressing at High Temperatures in Low-Bump-Height Solder Joints. CRYSTALS, 6(1), 0. https://doi.org/10.3390/cryst6010012
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/129679