Increasing the extraction efficiency of AlGaInP LEDs via n-side surface roughening
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2291 | en_US |
dc.citation.issue |
11 | en_US |
dc.citation.spage |
2289 | en_US |
dc.citation.volume |
17 | en_US |
dc.citation.woscount |
33 | |
dc.contributor.author |
Lee, YJ | en_US |
dc.contributor.author |
Kuo, HC | en_US |
dc.contributor.author |
Wang, SC | en_US |
dc.contributor.author |
Hsu, TC | en_US |
dc.contributor.author |
Hsieh, MH | en_US |
dc.contributor.author |
Jou, MJ | en_US |
dc.contributor.author |
Lee, BJ | en_US |
dc.contributor.department |
光電工程學系 | zh_TW |
dc.contributor.department |
Department of Photonics | en_US |
dc.date.accessioned |
2014-12-08T15:18:09Z | |
dc.date.available |
2014-12-08T15:18:09Z | |
dc.date.issued |
2005-11-01 | en_US |
dc.description.abstract |
An n-side-up AlGaInP-based light-emitting diode (LED) with a triangle-like surface morphology was fabricated using the adhesive layer bonding technique, followed by wet etching to roughen the surface. The light output power of the roughened-surface LED was 1.6 times higher than that of a flat-surface LED at an injection current of 20 mA, i.e., a significant improvement attributed to the ability of the roughened surface to not only reduce the internal reflection between the rear mirror system and the semiconductor-air interface, but also to effectively scatter the light outside the LED device. | en_US |
dc.identifier.doi |
10.1109/LPT.2005.858153 | en_US |
dc.identifier.issn |
1041-1135 | en_US |
dc.identifier.journal |
IEEE PHOTONICS TECHNOLOGY LETTERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/LPT.2005.858153 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/13116 | |
dc.identifier.wosnumber |
WOS:000232898100016 | |
dc.language.iso |
en_US | en_US |
dc.subject |
AlGaInP | en_US |
dc.subject |
light-emitting diode (LED) | en_US |
dc.subject |
surface roughening | en_US |
dc.title |
Increasing the extraction efficiency of AlGaInP LEDs via n-side surface roughening | en_US |
dc.type |
Article | en_US |
檔案
- 000232898100016.pdf (681.3 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Lee, Y., Kuo, H., Wang, S., Hsu, T., Hsieh, M., Jou, M., & Lee, B. (2005). Increasing the extraction efficiency of AlGaInP LEDs via n-side surface roughening. IEEE PHOTONICS TECHNOLOGY LETTERS, 17(11), 2289–2291. https://doi.org/10.1109/LPT.2005.858153
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/13116