標題: Increasing the extraction efficiency of AlGaInP LEDs via n-side surface roughening
作者: Lee, YJ
Kuo, HC
Wang, SC
Hsu, TC
Hsieh, MH
Jou, MJ
Lee, BJ
光電工程學系
Department of Photonics
關鍵字: AlGaInP;light-emitting diode (LED);surface roughening
公開日期: 1-十一月-2005
摘要: An n-side-up AlGaInP-based light-emitting diode (LED) with a triangle-like surface morphology was fabricated using the adhesive layer bonding technique, followed by wet etching to roughen the surface. The light output power of the roughened-surface LED was 1.6 times higher than that of a flat-surface LED at an injection current of 20 mA, i.e., a significant improvement attributed to the ability of the roughened surface to not only reduce the internal reflection between the rear mirror system and the semiconductor-air interface, but also to effectively scatter the light outside the LED device.
URI: http://dx.doi.org/10.1109/LPT.2005.858153
http://hdl.handle.net/11536/13116
ISSN: 1041-1135
DOI: 10.1109/LPT.2005.858153
期刊: IEEE PHOTONICS TECHNOLOGY LETTERS
Volume: 17
Issue: 11
起始頁: 2289
結束頁: 2291
顯示於類別:期刊論文


文件中的檔案:

  1. 000232898100016.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。