Fault Self-Detection Technique in Fiber Bragg Grating-Based Passive Sensor Network

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2016-11-15

期刊名稱

IEEE SENSORS JOURNAL

卷期與頁次

第 16 卷第 22 期,頁 8070–8074

ISSN

1530-437X

語言

英文

摘要

In this paper, we propose and experimentally investigate a fault self-detection technique in fiber Bragg grating (FBG)-based passive sensor network. Here, once a fault occurs on connecting fiber or FBG sensor, it can be detected directly by the proposed sensing network. Moreover, in the proposed FBG sensor system, the multiple wavelength-division-multiplexing FBG sensor numbers can be reduced significantly and also increase the sensing capability for sensing temperature and strain simultaneously. In the measurement, when the temperature variation is from 20 degrees C to 75 degrees C, the measured Bragg wavelength shift of tension is nearly 0.74 nm. While the strain shift of 0.3 mm is applied on FBG, the Bragg wavelength shift of nearly 1.88 nm is observed.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Yeh, C.-H., Tsai, N., Zhuang, Y.-H., Chow, C.-W., & Liu, W.-F. (2016). Fault Self-Detection Technique in Fiber Bragg Grating-Based Passive Sensor Network. IEEE SENSORS JOURNAL, 16(22), 8070–8074. https://doi.org/10.1109/JSEN.2016.2609458

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/132602