Enhancement of cell growth on honeycomb-structured polylactide surface using atmospheric-pressure plasma jet modification
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
542 | en_US |
dc.citation.spage |
534 | en_US |
dc.citation.volume |
394 | en_US |
dc.contributor.author |
Cheng, Kuang-Yao | en_US |
dc.contributor.author |
Chang, Chia-Hsing | en_US |
dc.contributor.author |
Yang, Yi-Wei | en_US |
dc.contributor.author |
Liao, Guo-Chun | en_US |
dc.contributor.author |
Liu, Chih-Tung | en_US |
dc.contributor.author |
Wu, Jong-Shinn | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2017-04-21T06:56:25Z | |
dc.date.available |
2017-04-21T06:56:25Z | |
dc.date.issued |
2017-02-01 | en_US |
dc.description.abstract |
In this paper, we compare the cell growth results of NIH-3T3 and Neuro-2A cells over 72 h on flat and honeycomb structured PLA films without and with a two-step atmospheric-pressure nitrogen-based plasma jet treatment. We developed a fabrication system used for forming of a uniform honeycomb structure on PLA surface, which can produce two different pore sizes, 3-4 mu m and 7-8 mu m, of honeycomb pattern. We applied a previously developed nitrogen-based atmospheric-pressure dielectric barrier discharge (DBD) jet system to treat the PLA film without and with honeycomb structure. NIH-3T3 and a much smaller Neuro-2A cells were cultivated on the films under various surface conditions. The results show that the two-step plasma treatment in combination with a honeycomb structure can enhance cell growth on PLA film, should the cell size be not too smaller than the pore size of honeycomb structure, e.g., NIH-3T3. Otherwise, cell growth would be better on flat PLA film, e.g., Neuro-2A. (C) 2016 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.apsusc.2016.10.093 | en_US |
dc.identifier.issn |
0169-4332 | en_US |
dc.identifier.journal |
APPLIED SURFACE SCIENCE | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.apsusc.2016.10.093 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/132731 | |
dc.identifier.wosnumber |
WOS:000389152900062 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Atmospheric pressure plasma | en_US |
dc.subject |
Dielectric barrier discharge | en_US |
dc.subject |
Surface modification | en_US |
dc.subject |
Honeycomb structure | en_US |
dc.subject |
PLA | en_US |
dc.subject |
Cell proliferation | en_US |
dc.title |
Enhancement of cell growth on honeycomb-structured polylactide surface using atmospheric-pressure plasma jet modification | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Cheng, K.-Y., Chang, C.-H., Yang, Y.-W., Liao, G.-C., Liu, C.-T., & Wu, J.-S. (2017). Enhancement of cell growth on honeycomb-structured polylactide surface using atmospheric-pressure plasma jet modification. APPLIED SURFACE SCIENCE, 394, 534–542. https://doi.org/10.1016/j.apsusc.2016.10.093
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/132731