Dynamic Error-Compensated Fixed-Width Booth Multiplier Based on Conditional-Probability of Input Series

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2016-08

期刊名稱

CIRCUITS SYSTEMS AND SIGNAL PROCESSING

卷期與頁次

第 35 卷第 8 期,頁 2972–2991

ISSN

0278-081X

語言

英文

摘要

This paper proposes a dynamic error-compensated circuit for a fixed-width Booth multiplier based on the conditional probability of input series (CPIS), which enables high-speed operation and low circuit overhead. The dynamic compensated value is produced directly from the multiplier of input series simultaneously with the Booth encoder and therefore does not affect the critical path. The compensated formula is derived using a mathematical probability model, rather than time-consuming simulation. This formula is a function of bit-length of the multiplier; thus, the compensated circuit is easily implemented for bit-length of 32, 64, or longer. Accuracy-efficiency, which indicates the signal-to-noise ratio per unit area and unit delay, is included for ease of comparison. Compared with previous works, the greatest advantage of the proposed CPIS is high speed. Furthermore, the proposed CPIS achieves higher accuracy-efficiency. Implemented using the TSMC 0.18-m CMOS process, the proposed 32-bit Booth multiplier has an operation frequency of 50 MHz with power consumption of 7.3 mW.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

He, W.-Q., Chen, Y.-H., & Jou, S.-J. (2016). Dynamic Error-Compensated Fixed-Width Booth Multiplier Based on Conditional-Probability of Input Series. CIRCUITS SYSTEMS AND SIGNAL PROCESSING, 35(8), 2972–2991. https://doi.org/10.1007/s00034-015-0186-2

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/133876