Optimizing the Auto-brazing Process Quality via a Taguchi-Neural Network Approach in the Automotive Industry

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2009

期刊名稱

2009 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, VOLS 1-4

卷期與頁次

頁 1347–+

ISSN

2157-3611

ISBN

978-1-4244-4869-2

語言

英文

摘要

Many parameters affect the quality of the auto-brazing process. It is not easy to obtain optimal parameters of this process. This paper applies an integrated approach using the Taguchi method and a neural network (NN) to optimize the lap joint quality of air conditioner parts. The proposed approach consists of two phases. First phase executes initial optimization via Taguchi method to construct a database for the NN. In second phase, we use a NN with the Levenberg-Marquardt back-propagation (LMBP) algorithm to provide the nonlinear relationship between factors and the response based on the experimental data. Then, a well-trained network model is applied to obtain the optimal factor settings. The experimental results showed that the tensile strength of specimens of the optimal parameters via the proposed approach is better than apply Taguchi method only.

所屬典藏

會議論文
顯示完整詮釋資料 統計資料

引用此條目

Lin, H. L., & Chou, C. P. (2009). Optimizing the Auto-brazing Process Quality via a Taguchi-Neural Network Approach in the Automotive Industry. 2009 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, VOLS 1-4, 1347–+. https://doi.org/10.1109/IEEM.2009.5373032

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/134931