Board level ESD of driver ICS on LCD panels
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
+ | en_US |
dc.citation.spage |
590 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Hsu, C. T. | en_US |
dc.contributor.author |
Tseng, J. C. | en_US |
dc.contributor.author |
Chen, Y. L. | en_US |
dc.contributor.author |
Tsai, F. Y. | en_US |
dc.contributor.author |
Yu, S. H. | en_US |
dc.contributor.author |
Chen, P. A. | en_US |
dc.contributor.author |
Ker, M. D. | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2017-04-21T06:49:10Z | |
dc.date.available |
2017-04-21T06:49:10Z | |
dc.date.issued |
2007 | en_US |
dc.description.abstract |
A method utilizing Charged Device Model (CDM) discharging to emulate real-world Charged Board Model (CBM) discharging was proposed and successfully addressed the weakest spot of whole chip. In order to extract the correlation between CDM pre-fail voltage VCDM and CBM pre-fail voltage VcBm, the capacitance and discharging waveforms of output pin on an IC and Printed Circuit Board (PCB) were measured. The results showed that the CBM evaluation board (EB) was not a must for large-size chip, as LCD driver ICs. CDM discharging can be used to direct investigate the weak point of design/layout for large-size chip. Besides, this paper addresses the guidelines about chip-level ESD cell design and layout optimization against CBM ESD damage. | en_US |
dc.identifier.doi |
10.1109/RELPHY.2007.369965 | en_US |
dc.identifier.isbn |
978-1-4244-0918-1 | en_US |
dc.identifier.issn |
1541-7026 | en_US |
dc.identifier.journal |
2007 IEEE INTERNATIONAL RELIABILITY PHYSICS SYMPOSIUM PROCEEDINGS - 45TH ANNUAL | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/RELPHY.2007.369965 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/135137 | |
dc.identifier.wosnumber |
WOS:000246989600106 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
ESD | en_US |
dc.subject |
CBM | en_US |
dc.subject |
HBM | en_US |
dc.subject |
CDM | en_US |
dc.subject |
PCB | en_US |
dc.title |
Board level ESD of driver ICS on LCD panels | en_US |
dc.type |
Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Hsu, C. T., Tseng, J. C., Chen, Y. L., Tsai, F. Y., Yu, S. H., Chen, P. A., & Ker, M. D. (2007). Board level ESD of driver ICS on LCD panels. 2007 IEEE INTERNATIONAL RELIABILITY PHYSICS SYMPOSIUM PROCEEDINGS - 45TH ANNUAL, 590–+. https://doi.org/10.1109/RELPHY.2007.369965
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/135137