Board level ESD of driver ICS on LCD panels

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2007

期刊名稱

2007 IEEE INTERNATIONAL RELIABILITY PHYSICS SYMPOSIUM PROCEEDINGS - 45TH ANNUAL

卷期與頁次

頁 590–+

ISSN

1541-7026

ISBN

978-1-4244-0918-1

語言

英文

摘要

A method utilizing Charged Device Model (CDM) discharging to emulate real-world Charged Board Model (CBM) discharging was proposed and successfully addressed the weakest spot of whole chip. In order to extract the correlation between CDM pre-fail voltage VCDM and CBM pre-fail voltage VcBm, the capacitance and discharging waveforms of output pin on an IC and Printed Circuit Board (PCB) were measured. The results showed that the CBM evaluation board (EB) was not a must for large-size chip, as LCD driver ICs. CDM discharging can be used to direct investigate the weak point of design/layout for large-size chip. Besides, this paper addresses the guidelines about chip-level ESD cell design and layout optimization against CBM ESD damage.

關鍵詞

ESDCBMHBMCDMPCB

所屬典藏

會議論文
顯示完整詮釋資料 統計資料

引用此條目

Hsu, C. T., Tseng, J. C., Chen, Y. L., Tsai, F. Y., Yu, S. H., Chen, P. A., & Ker, M. D. (2007). Board level ESD of driver ICS on LCD panels. 2007 IEEE INTERNATIONAL RELIABILITY PHYSICS SYMPOSIUM PROCEEDINGS - 45TH ANNUAL, 590–+. https://doi.org/10.1109/RELPHY.2007.369965

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/135137