Effect of activating flux and welding parameters on performance of aluminum alloy weldment in GTA welding
檔案
本條目沒有附加檔案。
日期
2012
類型
系所
期刊名稱
MATERIALS AND COMPUTATIONAL MECHANICS, PTS 1-3
卷期與頁次
第 117-119 卷,頁 1900–+
ISSN
1660-9336
ISBN
978-3-03785-280-4
語言
英文
摘要
The purpose of this work was to investigate the effect of activating fluxes and welding parameter to the penetration and depth-to-width ratio (DWR) of 6061 aluminum alloy welds. Bead-on-plate argon gas tungsten arc (GTA) welding process was made on 6061 aluminum alloy of plate without filling metals. The activating fluxes used in the experiment were CaO, ZnO, SiO2, TiO2, Al2O3, Cr2O3, CaF2 and Na2CO3. Based on the higher penetration of weld bead and welding arc voltage, four fluxes were selected to create three new mixtures using 50% of each original fluxes. The mixed fluxes were used to investigate the effect to the welding penetration. Finally, The Taguchi method was employed to achieve optimal DWR of weld bead and investigate the welding parameters that significantly affect welding quality. The experimental procedure of GTA welding with activating flux via the Taguchi method produced full penetration of weld bead on a 6.35 mm thickness of 6061 aluminum alloy plate with single pass weld.
網址
所屬典藏
會議論文引用此條目
Lin, H.-L., Juang, H.-W., & Yan, J.-C. (2012). Effect of activating flux and welding parameters on performance of aluminum alloy weldment in GTA welding. MATERIALS AND COMPUTATIONAL MECHANICS, PTS 1-3, 117-119, 1900–+. https://doi.org/10.4028/www.scientific.net/AMM.117-119.1900
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/135488