Cleaning methodology of small residue defect with surfactant in copper chemical mechanical polishing post-cleaning
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
80 | en_US |
dc.citation.spage |
77 | en_US |
dc.citation.volume |
618 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Wei, Kuo-Hsiu | en_US |
dc.contributor.author |
Hung, Chi-Cheng | en_US |
dc.contributor.author |
Wang, Yu-Sheng | en_US |
dc.contributor.author |
Liu, Chuan-Pu | en_US |
dc.contributor.author |
Chen, Kei-Wei | en_US |
dc.contributor.author |
Wang, Ying-Lang | en_US |
dc.contributor.department |
照明與能源光電研究所 | zh_TW |
dc.contributor.department |
Institute of Lighting and Energy Photonics | en_US |
dc.date.accessioned |
2017-04-21T06:48:55Z | |
dc.date.available |
2017-04-21T06:48:55Z | |
dc.date.issued |
2016-11-01 | en_US |
dc.description.abstract |
Advanced semiconductor manufacturing technology has adopted an alkaline solution for copper (Cu) corrosion prevention instead of the traditional acidic solution in the post-cleaning process of copper chemical mechanical polishing. Low particle and residue removal efficiency has been an issue for this process. In this study, we investigated the formation of small residue defects and the cleaning mechanism to remove these defects. The results show it is insufficient to remove the small residue defects by using the traditional process parameter tuning. Adding some friction between the pad and the wafer surface allowed the defects to be effectively reduced. (C) 2016 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.tsf.2016.05.007 | en_US |
dc.identifier.issn |
0040-6090 | en_US |
dc.identifier.journal |
THIN SOLID FILMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.tsf.2016.05.007 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/136348 | |
dc.identifier.wosnumber |
WOS:000389112000014 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Abrasive | en_US |
dc.subject |
Copper | en_US |
dc.subject |
Chemical mechanical polishing | en_US |
dc.subject |
Post-cleaning | en_US |
dc.subject |
Tetramethylammonium hydroxide (TMAH) | en_US |
dc.subject |
Citric acid | en_US |
dc.subject |
Perfiuorobutanesulfonic acid (PFBS) | en_US |
dc.title |
Cleaning methodology of small residue defect with surfactant in copper chemical mechanical polishing post-cleaning | en_US |
dc.type |
Article; Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Wei, K.-H., Hung, C.-C., Wang, Y.-S., Liu, C.-P., Chen, K.-W., & Wang, Y.-L. (2016). Cleaning methodology of small residue defect with surfactant in copper chemical mechanical polishing post-cleaning. THIN SOLID FILMS, 618, 77–80. https://doi.org/10.1016/j.tsf.2016.05.007
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/136348