Wafer bonding for high-brightness light-emitting diodes via indium tin oxide intermediate layers
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
285 | en_US |
dc.citation.issue |
1-2 | en_US |
dc.citation.spage |
280 | en_US |
dc.citation.volume |
478 | en_US |
dc.citation.woscount |
8 | |
dc.contributor.author |
Liu, PC | en_US |
dc.contributor.author |
Hou, CY | en_US |
dc.contributor.author |
Wu, YCS | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:19:18Z | |
dc.date.available |
2014-12-08T15:19:18Z | |
dc.date.issued |
2005-05-01 | en_US |
dc.description.abstract |
A direct wafer-bonding technique has been used to fabricate high-brightness light emitting diodes (LEDs). However, bonding processes were usually performed at elevated temperatures, possibly causing degradation in the quality of the LED structure. In addition to this, misorientation between the two bonded wafers may have caused defects between the wafers. In this study, these two problems were solved by bonding the InGaP/GaAs and GaAs wafers with an indium tin oxide (ITO) polycrystalline film at temperatures below 650 degrees C. It was found that the bonding occurred mainly through the In transport from the InGaP to ITO, and that the electrical resistance decreased with the bonding temperature. (c) 2004 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.tsf.2004.11.070 | en_US |
dc.identifier.issn |
0040-6090 | en_US |
dc.identifier.journal |
THIN SOLID FILMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.tsf.2004.11.070 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/13785 | |
dc.identifier.wosnumber |
WOS:000228039800047 | |
dc.language.iso |
en_US | en_US |
dc.subject |
wafer bonding | en_US |
dc.subject |
light-emitting diodes | en_US |
dc.subject |
LEDs | en_US |
dc.subject |
indium tin oxide | en_US |
dc.subject |
electrical resistance | en_US |
dc.title |
Wafer bonding for high-brightness light-emitting diodes via indium tin oxide intermediate layers | en_US |
dc.type |
Article | en_US |
檔案
- 000228039800047.pdf (617.6 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Liu, P., Hou, C., & Wu, Y. (2005). Wafer bonding for high-brightness light-emitting diodes via indium tin oxide intermediate layers. THIN SOLID FILMS, 478(1-2), 280–285. https://doi.org/10.1016/j.tsf.2004.11.070
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/13785