Wafer bonding for high-brightness light-emitting diodes via indium tin oxide intermediate layers

檔案

日期

2005-05-01

期刊名稱

THIN SOLID FILMS

摘要

A direct wafer-bonding technique has been used to fabricate high-brightness light emitting diodes (LEDs). However, bonding processes were usually performed at elevated temperatures, possibly causing degradation in the quality of the LED structure. In addition to this, misorientation between the two bonded wafers may have caused defects between the wafers. In this study, these two problems were solved by bonding the InGaP/GaAs and GaAs wafers with an indium tin oxide (ITO) polycrystalline film at temperatures below 650 degrees C. It was found that the bonding occurred mainly through the In transport from the InGaP to ITO, and that the electrical resistance decreased with the bonding temperature. (c) 2004 Elsevier B.V. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料