Aplication of plasma immersion ion implantation on seeding copper electroplating for multilevel interconnection
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
298 | en_US |
dc.citation.issue |
1-2 | en_US |
dc.citation.spage |
293 | en_US |
dc.citation.volume |
478 | en_US |
dc.citation.woscount |
2 | |
dc.contributor.author |
Chiu, SY | en_US |
dc.contributor.author |
Wang, YL | en_US |
dc.contributor.author |
Chang, SC | en_US |
dc.contributor.author |
Feng, MS | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:19:18Z | |
dc.date.available |
2014-12-08T15:19:18Z | |
dc.date.issued |
2005-05-01 | en_US |
dc.description.abstract |
In this study, an effective seeding technology, plasma immersion ion implantation of palladium (PIII Pd), was proposed to achieve defect-free gap filling for copper electroplating (Cu-ECP). It was found that a threshold dosage (similar to 5.2 x 10(18) m(-2)) of PIII I'd was required to drive Cu-ECP and the dependence of Pd dosage on the implantation time was quasi-linear. The thickness of electroplated copper films increased as the Pd dosage increased. Too high a Pd dosage caused a rough copper film with high resistivity (> 10 mu Omega cm) while too low a I'd dosage resulted in an insufficient nucleation site for Cu-ECP, leading to poor film adhesion. In addition, a higher substrate bias of PIII was suggested to enhance the gap-filling capability of Cu-ECP and the Cu(111) formation of electroplated copper films. (c) 2004 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.tsf.2004.11.187 | en_US |
dc.identifier.issn |
0040-6090 | en_US |
dc.identifier.journal |
THIN SOLID FILMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.tsf.2004.11.187 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/13786 | |
dc.identifier.wosnumber |
WOS:000228039800049 | |
dc.language.iso |
en_US | en_US |
dc.subject |
plasma immersion ion implantation (PIII) | en_US |
dc.subject |
palladium | en_US |
dc.subject |
seed layer | en_US |
dc.subject |
copper | en_US |
dc.subject |
electroplating | en_US |
dc.title |
Aplication of plasma immersion ion implantation on seeding copper electroplating for multilevel interconnection | en_US |
dc.type |
Article | en_US |
檔案
- 000228039800049.pdf (557.8 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Chiu, S., Wang, Y., Chang, S., & Feng, M. (2005). Aplication of plasma immersion ion implantation on seeding copper electroplating for multilevel interconnection. THIN SOLID FILMS, 478(1-2), 293–298. https://doi.org/10.1016/j.tsf.2004.11.187
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/13786