Aplication of plasma immersion ion implantation on seeding copper electroplating for multilevel interconnection

檔案

日期

2005-05-01

期刊名稱

THIN SOLID FILMS

摘要

In this study, an effective seeding technology, plasma immersion ion implantation of palladium (PIII Pd), was proposed to achieve defect-free gap filling for copper electroplating (Cu-ECP). It was found that a threshold dosage (similar to 5.2 x 10(18) m(-2)) of PIII I'd was required to drive Cu-ECP and the dependence of Pd dosage on the implantation time was quasi-linear. The thickness of electroplated copper films increased as the Pd dosage increased. Too high a Pd dosage caused a rough copper film with high resistivity (> 10 mu Omega cm) while too low a I'd dosage resulted in an insufficient nucleation site for Cu-ECP, leading to poor film adhesion. In addition, a higher substrate bias of PIII was suggested to enhance the gap-filling capability of Cu-ECP and the Cu(111) formation of electroplated copper films. (c) 2004 Elsevier B.V. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Chiu, S., Wang, Y., Chang, S., & Feng, M. (2005). Aplication of plasma immersion ion implantation on seeding copper electroplating for multilevel interconnection. THIN SOLID FILMS, 478(1-2), 293–298. https://doi.org/10.1016/j.tsf.2004.11.187

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/13786