Investigation of Double-Snapback Characteristic in Resistor-Triggered SCRs Stacking Structure
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
4205 | en_US |
dc.citation.spage |
4200 | en_US |
dc.citation.volume |
64 | en_US |
dc.contributor.author |
Yen, Shiang-Shiou | en_US |
dc.contributor.author |
Cheng, Chun-Hu | en_US |
dc.contributor.author |
Fan, Chia-Chi | en_US |
dc.contributor.author |
Chiu, Yu-Chien | en_US |
dc.contributor.author |
Hsu, Hsiao-Hsuan | en_US |
dc.contributor.author |
Lan, Yu-Pin | en_US |
dc.contributor.author |
Chang, Chun-Yen | en_US |
dc.contributor.department |
電機學院 | zh_TW |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
電子與資訊研究中心 | zh_TW |
dc.contributor.department |
College of Electrical and Computer Engineering | en_US |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.contributor.department |
Microelectronics and Information Systems Research Center | en_US |
dc.date.accessioned |
2018-08-21T05:52:49Z | |
dc.date.available |
2018-08-21T05:52:49Z | |
dc.date.issued |
2017-10-01 | en_US |
dc.description.abstract |
Achieving high latch-up immunity is critical for power-rail electrostatic discharge (ESD) clamp circuits in high-voltage (HV) integrated circuit products. To investigate how shunt resistance affects the transmission line pulsing current-voltage characteristics of resistance-triggered stacked silicon controlled rectifiers (SCRs), a lateral SCR (LSCR) and a modified LSCR were combined in several SCR stacked structures with various shunt resistances. Compared with in tradition stacked ESD cells, the snapback margin of the SCRs does not expand and can even be reduced. A high holding voltage of 33.4 V is achieved using the resistance-triggered stacked SCR technique in a 0.11 mu m32-V HV process. A trigger voltage of approximately 51 V and a failure current of 3.3 A is achieved in this experiment. According to theorem analysis based on a voltage decoupling equation, the minimum trigger voltage can probably be further reduced to 46 V by using the resistance-triggered stacked SCR technique. This paper can offer a simple guideline for designing ESD protection circuit using the resistor-triggered SCRs stacking structure. | en_US |
dc.identifier.doi |
10.1109/TED.2017.2736511 | en_US |
dc.identifier.issn |
0018-9383 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON ELECTRON DEVICES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TED.2017.2736511 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/143989 | |
dc.identifier.wosnumber |
WOS:000413728700033 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Electrostatic discharge (ESD) | en_US |
dc.subject |
holding voltage | en_US |
dc.subject |
latchup immunity | en_US |
dc.subject |
power-rail clamp | en_US |
dc.subject |
silicon control rectifier (SCR) | en_US |
dc.subject |
stacked SCR | en_US |
dc.subject |
transmission line pulsing (TLP) | en_US |
dc.subject |
trigger voltage | en_US |
dc.title |
Investigation of Double-Snapback Characteristic in Resistor-Triggered SCRs Stacking Structure | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Yen, S.-S., Cheng, C.-H., Fan, C.-C., Chiu, Y.-C., Hsu, H.-H., Lan, Y.-P., & Chang, C.-Y. (2017). Investigation of Double-Snapback Characteristic in Resistor-Triggered SCRs Stacking Structure. IEEE TRANSACTIONS ON ELECTRON DEVICES, 64, 4200–4205. https://doi.org/10.1109/TED.2017.2736511
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/143989