Investigation of Double-Snapback Characteristic in Resistor-Triggered SCRs Stacking Structure
檔案
本條目沒有附加檔案。
日期
2017-10-01
作者
類型
期刊名稱
IEEE TRANSACTIONS ON ELECTRON DEVICES
卷期與頁次
第 64 卷,頁 4200–4205
ISSN
0018-9383
語言
英文
摘要
Achieving high latch-up immunity is critical for power-rail electrostatic discharge (ESD) clamp circuits in high-voltage (HV) integrated circuit products. To investigate how shunt resistance affects the transmission line pulsing current-voltage characteristics of resistance-triggered stacked silicon controlled rectifiers (SCRs), a lateral SCR (LSCR) and a modified LSCR were combined in several SCR stacked structures with various shunt resistances. Compared with in tradition stacked ESD cells, the snapback margin of the SCRs does not expand and can even be reduced. A high holding voltage of 33.4 V is achieved using the resistance-triggered stacked SCR technique in a 0.11 mu m32-V HV process. A trigger voltage of approximately 51 V and a failure current of 3.3 A is achieved in this experiment. According to theorem analysis based on a voltage decoupling equation, the minimum trigger voltage can probably be further reduced to 46 V by using the resistance-triggered stacked SCR technique. This paper can offer a simple guideline for designing ESD protection circuit using the resistor-triggered SCRs stacking structure.
關鍵詞
Electrostatic discharge (ESD)holding voltagelatchup immunitypower-rail clampsilicon control rectifier (SCR)stacked SCRtransmission line pulsing (TLP)trigger voltage所屬典藏
期刊論文引用此條目
Yen, S.-S., Cheng, C.-H., Fan, C.-C., Chiu, Y.-C., Hsu, H.-H., Lan, Y.-P., & Chang, C.-Y. (2017). Investigation of Double-Snapback Characteristic in Resistor-Triggered SCRs Stacking Structure. IEEE TRANSACTIONS ON ELECTRON DEVICES, 64, 4200–4205. https://doi.org/10.1109/TED.2017.2736511
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/143989