Optimal design of the semi-dimple vortex generator in the fin and tube heat exchanger
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1186 | en_US |
dc.citation.spage |
1173 | en_US |
dc.citation.volume |
120 | en_US |
dc.contributor.author |
Chimres, Nares | en_US |
dc.contributor.author |
Wang, Chi-Chuan | en_US |
dc.contributor.author |
Wongwises, Somchai | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2018-08-21T05:53:17Z | |
dc.date.available |
2018-08-21T05:53:17Z | |
dc.date.issued |
2018-05-01 | en_US |
dc.description.abstract |
The fin and tube heat exchanger with a semi-dimple pair is numerically studied in terms of the air side's thermal performance. The investigated parameters consist of the diameter, attack angle and the placed location of the semi-dimple. The results show that the 30 attack angle, 5.5 mm vertical distance and 7.5 mm horizontal distance can perform the highest j/f ratio or "goodness parameter" of every semi-dimple's diameter. Additionally, the thermal performance of the fin with a semi-dimple pair is also compared with that of the fin with existing semi-dimples and the plain fin within the Reynolds number ranging from 813 to 4019. Obviously, the existing semi-dimple exhibits the highest heat transfer coefficient and pressure drop. However, the semi-dimples' pair demonstrates a goodness factor of 33-37% greater than the existing semi-dimples and 15-20% greater than the plain fin, approximately. (C) 2017 Published by Elsevier Ltd. | en_US |
dc.identifier.doi |
10.1016/j.ijheatmasstransfer.2017.11.121 | en_US |
dc.identifier.issn |
0017-9310 | en_US |
dc.identifier.journal |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.ijheatmasstransfer.2017.11.121 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/144500 | |
dc.identifier.wosnumber |
WOS:000424716500099 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Fin and tube heat exchanger | en_US |
dc.subject |
Heat transfer enhancement | en_US |
dc.subject |
CFD | en_US |
dc.subject |
Vortex generator | en_US |
dc.subject |
Semi dimple | en_US |
dc.title |
Optimal design of the semi-dimple vortex generator in the fin and tube heat exchanger | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Chimres, N., Wang, C.-C., & Wongwises, S. (2018). Optimal design of the semi-dimple vortex generator in the fin and tube heat exchanger. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 120, 1173–1186. https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.121
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/144500