Optimal design of the semi-dimple vortex generator in the fin and tube heat exchanger
檔案
本條目沒有附加檔案。
日期
2018-05-01
類型
系所
期刊名稱
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
卷期與頁次
第 120 卷,頁 1173–1186
ISSN
0017-9310
語言
英文
摘要
The fin and tube heat exchanger with a semi-dimple pair is numerically studied in terms of the air side's thermal performance. The investigated parameters consist of the diameter, attack angle and the placed location of the semi-dimple. The results show that the 30 attack angle, 5.5 mm vertical distance and 7.5 mm horizontal distance can perform the highest j/f ratio or "goodness parameter" of every semi-dimple's diameter. Additionally, the thermal performance of the fin with a semi-dimple pair is also compared with that of the fin with existing semi-dimples and the plain fin within the Reynolds number ranging from 813 to 4019. Obviously, the existing semi-dimple exhibits the highest heat transfer coefficient and pressure drop. However, the semi-dimples' pair demonstrates a goodness factor of 33-37% greater than the existing semi-dimples and 15-20% greater than the plain fin, approximately. (C) 2017 Published by Elsevier Ltd.
網址
所屬典藏
期刊論文引用此條目
Chimres, N., Wang, C.-C., & Wongwises, S. (2018). Optimal design of the semi-dimple vortex generator in the fin and tube heat exchanger. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 120, 1173–1186. https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.121
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/144500