標題: | Shake table tests on RC frame infilled by slitted masonry panels |
作者: | Yuen, Terry Y. P. Zhang, Han-hui Kuang, J. S. Huang, Qunxian 土木工程學系 Department of Civil Engineering |
關鍵字: | Shaking table test;Unreinforced masonry infill;Reinforced concrete;Anchorage;Slit walls;Rocking |
公開日期: | 1-九月-2018 |
摘要: | Unreinforced masonry infill walls are widely used as non-structural partitions in RC frames. The effects of infills on the structural responses are often ignored in the design process since they are generally considered as expendable elements. However, recent studies have shown that not only shear damage can be inflicted to the columns braced by the infill walls, but also that the structural stability can be jeopardised by the fall-off of the infills. This paper presents the development of new detailing methods for the infill walls, which features slit panels, isolation gaps between the infills and columns, and anchorage of the infills. The proposed detailing methods were tested and verified experimentally using shake-table tests on five 1/3-scale infilled RC frame specimens with different combinations of the features stated above. The design and construction of the shake-table test specimens have taken into account the similitude requirements. The test results indicate that the proposed detailing method effectively reduced the undesirable interaction between column and infill walls. And the use of proper anchorage could prevent the fall off of infills from the bounding frame. Furthermore, the specimens with slit infill walls displayed better seismic performances, which could be attributed to the rocking behaviour of the sub-panels with increased aspect ratios. |
URI: | http://dx.doi.org/10.1007/s10518-018-0339-3 http://hdl.handle.net/11536/145279 |
ISSN: | 1570-761X |
DOI: | 10.1007/s10518-018-0339-3 |
期刊: | BULLETIN OF EARTHQUAKE ENGINEERING |
Volume: | 16 |
起始頁: | 4027 |
結束頁: | 4052 |
顯示於類別: | 期刊論文 |