A Study on Speech Recognition Control for a Surgical Robot

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2017-04-01

類型

期刊名稱

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS

卷期與頁次

第 13 卷,頁 607–615

ISSN

1551-3203

語言

英文

摘要

Speech recognition is common in electronic appliances and personal services, but its use for industrial and medical purposes is rare because of the presence of motion ambiguity. For minimally invasive surgical robotic assistants, this ambiguity arises because the robotic motion is not calibrated to the camera images. This paper presents a design for a speech recognition interface for an HIWIN robotic endoscope holder. A new intentional speech control is proposed to control movement over long distances. To decrease ambiguity, a method is proposed for voice-to-motion calibration that compares the degree of change in the endoscope image for a voice command. A speech recognition algorithm is implemented on Ubuntu OS, using CMU Sphinx. The control signal is sent to the robot controller using serial-port communication through a RS232 cable. The experimental results show that the proposed intentional speech control strategy has a navigation precision of up to 3.1 degrees of angular displacement for the endoscope. The overall system processing time, including robotic motion, is 3.22 s for similar to 1.8-s speech duration. The reference image navigation range is from 2.5 mm for similar to 0.5- s speech duration up to 6 mm for similar to 1.8-s speech duration, using a setup with camera tip that is located at a distance of 5 cm from the remote center of motion point.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Zinchenko, K., Wu, C.-Y., & Song, K.-T. (2017). A Study on Speech Recognition Control for a Surgical Robot. IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 13, 607–615. https://doi.org/10.1109/TII.2016.2625818

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/145424