MEASUREMENT OF SURFACE PROFILE AND SURFACE ROUGHNESS OF FIBRE-OPTIC INTERCONNECT BY FAST FOURIER TRANSFORM
檔案
本條目沒有附加檔案。
日期
2017-06-17
類型
系所
期刊名稱
METROLOGY AND MEASUREMENT SYSTEMS
卷期與頁次
第 24 卷,頁 381–390
ISSN
0860-8229
語言
英文
摘要
This study proposes a surface profile and roughness measurement system for a fibre-optic interconnect based on optical interferometry. On the principle of Fizeau interferometer, an interference fringe is formed on the fibre end-face of the fibre-optic interconnect, and the fringe pattern is analysed using the Fast Fourier transform method to reconstruct the surface profile. However, as the obtained surface profile contains some amount of tilt, a rule for estimating this tilt value is developed in this paper. The actual fibre end-face surface profile is obtained by subtracting the estimated tilt amount from the surface profile, as calculated by the Fast Fourier transform method, and the corresponding surface roughness can be determined. The proposed system is characterized by non-contact measurement, and the sample is not coated with a reflector during measurement. According to the experimental results, the difference between the roughness measurement result of an Atomic Force Microscope (AFM) and the measurement result of this system is less than 3 nm.
所屬典藏
期刊論文引用此條目
Lin, C. S., Yang, S. W., Lin, H. L., & Li, J. W. (2017). MEASUREMENT OF SURFACE PROFILE AND SURFACE ROUGHNESS OF FIBRE-OPTIC INTERCONNECT BY FAST FOURIER TRANSFORM. METROLOGY AND MEASUREMENT SYSTEMS, 24, 381–390. https://doi.org/10.1515/mms-2017-0028
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/145735