Wireless Tool Holder Sensor Design for Cutting Force Measurement Applied to Chatter Detection

檔案

本條目沒有附加檔案。

日期

2016-01-01

期刊名稱

PROCEEDINGS OF THE 2016 IEEE REGION 10 CONFERENCE (TENCON)

卷期與頁次

頁 1845–1848

語言

英文

摘要

Cutting forces in machining operations are of great importance because their characteristics are useful for predicting and detecting tool conditions and other occurrences. For example, one important and common problem shown in metal cutting is chatter, and cutting Forces have a strong correlation with this phenomenon. Many researchers have worked in chatter detection and estimation using cutting forces. This work proposes the use of cutting force measurements and analysis of the frequency spectrum to detect chatter. The cutting force should be measured using a simple, compact, and low cost technique. Hence, in this work the measurement technique proposed in [1] of using strain gauges to measure the cutting forces is applied. Additionally, the previous design was enhanced and upgraded into a wireless system for monitoring. This new smart tool holder uses wireless technology to transmit the measurement data, and therefore removes various constraints the previous design had because of the use of wires. With the new design and added interface operations such as frequency response of the measured signal, a more functional online monitoring system was established. A peak in high frequencies was observed in the cutting test experiments when chatter appears.

所屬典藏

會議論文
顯示完整詮釋資料 統計資料

引用此條目

Uquillas, D. A. R., & Hsiao, T. (2016). Wireless Tool Holder Sensor Design for Cutting Force Measurement Applied to Chatter Detection. PROCEEDINGS OF THE 2016 IEEE REGION 10 CONFERENCE (TENCON), 1845–1848. https://ir.lib.nycu.edu.tw/handle/11536/146550

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/146550