Evaluation of a 100-nm Gate Length E-Mode InAs High Electron Mobility Transistor With Ti/Pt/Au Ohmic Contacts and Mesa Sidewall Channel Etch for High-Speed and Low-Power Logic Applications
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
802 | en_US |
dc.citation.spage |
797 | en_US |
dc.citation.volume |
6 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Yao, Jing-Neng | en_US |
dc.contributor.author |
Lin, Yueh-Chin | en_US |
dc.contributor.author |
Hsu, Heng-Tung | en_US |
dc.contributor.author |
Yang, Kai-Chun | en_US |
dc.contributor.author |
Hsu, Hisang-Hua | en_US |
dc.contributor.author |
Sze, Simon M. | en_US |
dc.contributor.author |
Chang, Edward Yi | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
光電系統研究所 | zh_TW |
dc.contributor.department |
影像與生醫光電研究所 | zh_TW |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
國際半導體學院 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.contributor.department |
Institute of Photonic System | en_US |
dc.contributor.department |
Institute of Imaging and Biomedical Photonics | en_US |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.contributor.department |
International College of Semiconductor Technology | en_US |
dc.date.accessioned |
2019-04-02T05:59:36Z | |
dc.date.available |
2019-04-02T05:59:36Z | |
dc.date.issued |
2018-01-01 | en_US |
dc.description.abstract |
In this paper, a 100-nm gate length InAs high electron mobility transistor (HEMT) with non-alloyed Ti/Pt/Au ohmic contacts and mesa sidewall channel etch was investigated for high-speed and low-power logic applications. The device exhibited a low subthreshold swing (SS) of 63.3 mV/decade, a drain induced barrier lowering value of 23.3 mV/V, an I-on/I-off ratio of 1.34 x 10(4), a G(m,max)/SS ratio of 27.6, a current gain cut-off frequency of 439 GHz with a gate delay time of 0.36 ps, and an off-state gate leakage current of less than 1.6 x 10(-5) A/mm at V-DS = 0.5 V. These results demonstrated that the presence of non-annealed ohmic contacts with mesa sidewall etch process allowed the fabrication of InAs HEMTs with excellent electrical characteristics for high-speed and low-power logic applications. | en_US |
dc.identifier.doi |
10.1109/JEDS.2018.2853547 | en_US |
dc.identifier.issn |
2168-6734 | en_US |
dc.identifier.journal |
IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/JEDS.2018.2853547 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/147919 | |
dc.identifier.wosnumber |
WOS:000440004900003 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
InAs | en_US |
dc.subject |
E-mode | en_US |
dc.subject |
sidewall etch | en_US |
dc.subject |
non-alloyed | en_US |
dc.title |
Evaluation of a 100-nm Gate Length E-Mode InAs High Electron Mobility Transistor With Ti/Pt/Au Ohmic Contacts and Mesa Sidewall Channel Etch for High-Speed and Low-Power Logic Applications | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Yao, J.-N., Lin, Y.-C., Hsu, H.-T., Yang, K.-C., Hsu, H.-H., Sze, S. M., & Chang, E. Y. (2018). Evaluation of a 100-nm Gate Length E-Mode InAs High Electron Mobility Transistor With Ti/Pt/Au Ohmic Contacts and Mesa Sidewall Channel Etch for High-Speed and Low-Power Logic Applications. IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY, 6, 797–802. https://doi.org/10.1109/JEDS.2018.2853547
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/147919