Evaluation of a 100-nm Gate Length E-Mode InAs High Electron Mobility Transistor With Ti/Pt/Au Ohmic Contacts and Mesa Sidewall Channel Etch for High-Speed and Low-Power Logic Applications
檔案
本條目沒有附加檔案。
日期
2018-01-01
作者
類型
期刊名稱
IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY
卷期與頁次
第 6 卷,頁 797–802
ISSN
2168-6734
語言
英文
摘要
In this paper, a 100-nm gate length InAs high electron mobility transistor (HEMT) with non-alloyed Ti/Pt/Au ohmic contacts and mesa sidewall channel etch was investigated for high-speed and low-power logic applications. The device exhibited a low subthreshold swing (SS) of 63.3 mV/decade, a drain induced barrier lowering value of 23.3 mV/V, an I-on/I-off ratio of 1.34 x 10(4), a G(m,max)/SS ratio of 27.6, a current gain cut-off frequency of 439 GHz with a gate delay time of 0.36 ps, and an off-state gate leakage current of less than 1.6 x 10(-5) A/mm at V-DS = 0.5 V. These results demonstrated that the presence of non-annealed ohmic contacts with mesa sidewall etch process allowed the fabrication of InAs HEMTs with excellent electrical characteristics for high-speed and low-power logic applications.
所屬典藏
期刊論文引用此條目
Yao, J.-N., Lin, Y.-C., Hsu, H.-T., Yang, K.-C., Hsu, H.-H., Sze, S. M., & Chang, E. Y. (2018). Evaluation of a 100-nm Gate Length E-Mode InAs High Electron Mobility Transistor With Ti/Pt/Au Ohmic Contacts and Mesa Sidewall Channel Etch for High-Speed and Low-Power Logic Applications. IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY, 6, 797–802. https://doi.org/10.1109/JEDS.2018.2853547
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/147919