Correlation between the Microstructures of Bonding Interfaces and the Shear Strength of Cu-to-Cu Joints Using (111)-Oriented and Nanotwinned Cu
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.volume |
11 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Juang, Jing-Ye | en_US |
dc.contributor.author |
Lu, Chia-Ling | en_US |
dc.contributor.author |
Li, Yu-Jin | en_US |
dc.contributor.author |
Tu, K. N. | en_US |
dc.contributor.author |
Chen, Chih | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2019-04-02T06:00:50Z | |
dc.date.available |
2019-04-02T06:00:50Z | |
dc.date.issued |
2018-12-01 | en_US |
dc.description.abstract |
Highly (111)-oriented Cu pillar-bumps were bonded to highly (111)-oriented Cu films at temperatures ranging from 200 degrees C/100 degrees C to 350 degrees C/100 degrees C in N-2 ambient conditions. The microstructures of the bonded interfaces affected the shear strength performance of the bonded Cu joints. The bonded interfaces at 300 degrees C/100 degrees C and 350 degrees C/100 degrees C had far fewer voids than interfaces bonded at 200 degrees C/100 degrees C and 250 degrees C/100 degrees C. In addition, grain growth took place across the bonding interfaces at temperatures above 300 degrees C/100 degrees C. The corresponding orientation map (OIM) showed the preferred orientation of large grown grains to be <100>. Shear tests revealed that the fracture mode was brittle for joints bonded at 200 degrees C/100 degrees C, but became ductile after bonded above 300 degrees C/100 degrees C. Based on the results, we found that voids and grain growth behavior play import roles in the shear strength performance of bonded Cu joints. | en_US |
dc.identifier.doi |
10.3390/ma11122368 | en_US |
dc.identifier.issn |
1996-1944 | en_US |
dc.identifier.journal |
MATERIALS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.3390/ma11122368 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/148750 | |
dc.identifier.wosnumber |
WOS:000456419200026 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Cu-to-Cu direct bonding | en_US |
dc.subject |
nanotwinned Cu | en_US |
dc.subject |
surface diffusion | en_US |
dc.subject |
grain growth | en_US |
dc.subject |
shear strength | en_US |
dc.title |
Correlation between the Microstructures of Bonding Interfaces and the Shear Strength of Cu-to-Cu Joints Using (111)-Oriented and Nanotwinned Cu | en_US |
dc.type |
Article | en_US |
檔案
- 2edd5941858961d012ad235b6dcc5889.pdf (18.9 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Juang, J.-Y., Lu, C.-L., Li, Y.-J., Tu, K. N., & Chen, C. (2018). Correlation between the Microstructures of Bonding Interfaces and the Shear Strength of Cu-to-Cu Joints Using (111)-Oriented and Nanotwinned Cu. MATERIALS, 11. https://doi.org/10.3390/ma11122368
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/148750