Adhesion and Material Properties Between Polyimide and Passivation Layers for Polymer/Metal Hybrid Bonding in 3-D Integration
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
418 | en_US |
dc.citation.spage |
412 | en_US |
dc.citation.volume |
9 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Lu, Cheng-Hsien | en_US |
dc.contributor.author |
Kho, Yi-Tung | en_US |
dc.contributor.author |
Chen, Chiao-Pei | en_US |
dc.contributor.author |
Tsai, Bin-Ling | en_US |
dc.contributor.author |
Chen, Kuan-Neng | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2019-04-02T05:59:00Z | |
dc.date.available |
2019-04-02T05:59:00Z | |
dc.date.issued |
2019-03-01 | en_US |
dc.description.abstract |
This paper investigates polymer/metal hybrid bonding structure using conventional polyimide and modified polyimide-like material. Adhesion properties between bonding material and passivation layer were evaluated by four-point bending method, atomic force microscopy, water contact angle measurement, and X-ray photoelectron spectroscopy. Various annealing temperatures were applied to verify the reliability under thermal stress. The results show that the modified polyimide-like material with the curing temperature below 250 degrees C has better adhesion than the conventional polyimide. This modified polyimide material can be used in low-temperature hybrid bonding technology for advanced integration. | en_US |
dc.identifier.doi |
10.1109/TCPMT.2019.2895515 | en_US |
dc.identifier.issn |
2156-3950 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TCPMT.2019.2895515 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/149028 | |
dc.identifier.wosnumber |
WOS:000461334400004 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Adhesion | en_US |
dc.subject |
four-point bending | en_US |
dc.subject |
hybrid bonding | en_US |
dc.subject |
polyimide | en_US |
dc.subject |
X-ray photoelectron spectroscopy (XPS) | en_US |
dc.title |
Adhesion and Material Properties Between Polyimide and Passivation Layers for Polymer/Metal Hybrid Bonding in 3-D Integration | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Lu, C.-H., Kho, Y.-T., Chen, C.-P., Tsai, B.-L., & Chen, K.-N. (2019). Adhesion and Material Properties Between Polyimide and Passivation Layers for Polymer/Metal Hybrid Bonding in 3-D Integration. IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 9, 412–418. https://doi.org/10.1109/TCPMT.2019.2895515
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/149028