Sintering Behavior, Microstructure, and Dielectric Properties of Nano-Ba0.7Sr0.3TiO3 Ceramics
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
7952 | en_US |
dc.citation.spage |
7947 | en_US |
dc.citation.volume |
47 | en_US |
dc.citation.woscount |
1 | en_US |
dc.contributor.author |
Ying, Kuo-Liang | en_US |
dc.contributor.author |
Hsieh, Tsung-Eong | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2019-04-02T06:00:57Z | |
dc.date.available |
2019-04-02T06:00:57Z | |
dc.date.issued |
2008-10-01 | en_US |
dc.description.abstract |
Nanoscale Ba0.7Sr0.3TiO3 (BST) powders were synthesized by solid-state reaction, chemical dispersion, and mechanical grinding. Capacitor samples based on the nano-BST powders were then prepared; their sintering behaviors at different temperatures, dielectric properties, and correlations to microstructure were investigated accordingly. It was found that specific sintering conditions are essential for achieving high-density (>= 95%) BST samples with a desired microstructure. Dielectric property measurements revealed that the best result was achieved in samples sintered at 1200 degrees C for 6h (dielectric constant = 9700; dielectric loss = 0.04) or at 1300 degrees C for 1 h (dielectric constant = 9800; dielectric loss = 0.075). The BST samples exhibited a lower Curie point (T-C) than conventional BaTiO3 (BTO) and BST systems. The improvement of dielectric properties and phase transition temperature were attributed to the fine grain structure in BST samples. | en_US |
dc.identifier.doi |
10.1143/JJAP.47.7947 | en_US |
dc.identifier.issn |
0021-4922 | en_US |
dc.identifier.journal |
JAPANESE JOURNAL OF APPLIED PHYSICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1143/JJAP.47.7947 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/149590 | |
dc.identifier.wosnumber |
WOS:000260443900042 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
nanoscale ceramics | en_US |
dc.subject |
Ba0.7Sr0.3TiO3 (EST) | en_US |
dc.subject |
sintering | en_US |
dc.subject |
dielectric properties | en_US |
dc.title |
Sintering Behavior, Microstructure, and Dielectric Properties of Nano-Ba0.7Sr0.3TiO3 Ceramics | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Ying, K.-L., & Hsieh, T.-E. (2008). Sintering Behavior, Microstructure, and Dielectric Properties of Nano-Ba0.7Sr0.3TiO3 Ceramics. JAPANESE JOURNAL OF APPLIED PHYSICS, 47, 7947–7952. https://doi.org/10.1143/JJAP.47.7947
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/149590