Sintering Behavior, Microstructure, and Dielectric Properties of Nano-Ba0.7Sr0.3TiO3 Ceramics

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2008-10-01

類型

期刊名稱

JAPANESE JOURNAL OF APPLIED PHYSICS

卷期與頁次

第 47 卷,頁 7947–7952

ISSN

0021-4922

語言

英文

摘要

Nanoscale Ba0.7Sr0.3TiO3 (BST) powders were synthesized by solid-state reaction, chemical dispersion, and mechanical grinding. Capacitor samples based on the nano-BST powders were then prepared; their sintering behaviors at different temperatures, dielectric properties, and correlations to microstructure were investigated accordingly. It was found that specific sintering conditions are essential for achieving high-density (>= 95%) BST samples with a desired microstructure. Dielectric property measurements revealed that the best result was achieved in samples sintered at 1200 degrees C for 6h (dielectric constant = 9700; dielectric loss = 0.04) or at 1300 degrees C for 1 h (dielectric constant = 9800; dielectric loss = 0.075). The BST samples exhibited a lower Curie point (T-C) than conventional BaTiO3 (BTO) and BST systems. The improvement of dielectric properties and phase transition temperature were attributed to the fine grain structure in BST samples.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Ying, K.-L., & Hsieh, T.-E. (2008). Sintering Behavior, Microstructure, and Dielectric Properties of Nano-Ba0.7Sr0.3TiO3 Ceramics. JAPANESE JOURNAL OF APPLIED PHYSICS, 47, 7947–7952. https://doi.org/10.1143/JJAP.47.7947

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/149590