Reproducible resistive switching behavior in sputtered CeO2 polycrystalline films
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
483 | en_US |
dc.citation.spage |
480 | en_US |
dc.citation.volume |
203 | en_US |
dc.citation.woscount |
49 | en_US |
dc.contributor.author |
Lin, Chih-Yang | en_US |
dc.contributor.author |
Lee, Dai-Ying | en_US |
dc.contributor.author |
Wang, Sheng-Yi | en_US |
dc.contributor.author |
Lin, Chun-Chieh | en_US |
dc.contributor.author |
Tseng, Tseung-Yuen | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2019-04-02T06:00:56Z | |
dc.date.available |
2019-04-02T06:00:56Z | |
dc.date.issued |
2008-12-25 | en_US |
dc.description.abstract |
Sputter-deposited CeO2 film in the metal-insulator-metal structure exhibits repeatable resistive switching behavior under voltage sweep. Based on the X-ray diffraction patterns and the cross-sectional scanning electron microscope image, the CeO2 film is polycrystalline with columnar grains perpendicular to the bottom electrode. Moreover, due to the symmetric device structure of Pt/CeO2/Pt, the resistive switching behavior is independent of bias polarity so that both positive and negative voltages can switch the device from high conducting state (ON-state) into low conducting state (OFF-state) and then back to ON-state, which is named non-polar resistive switching. The resistance ratio between two memory states is about five orders of magnitude, which is stable over 10(4) S at 0.3 V stress. in addition, the resistance ratio decreases with increasing the current compliance during forming process. The stability of ON-state, OFF-state, and as-deposited film state (the state before performing forming process) against temperature is also investigated in this study, showing that the OFF-state is less stable. (C) 2008 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.surfcoat.2008.07.004 | en_US |
dc.identifier.issn |
0257-8972 | en_US |
dc.identifier.journal |
SURFACE & COATINGS TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.surfcoat.2008.07.004 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/149646 | |
dc.identifier.wosnumber |
WOS:000261654100017 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
CeO2 | en_US |
dc.subject |
Resistive switching | en_US |
dc.subject |
Nonvolatile memory | en_US |
dc.subject |
RRAM | en_US |
dc.title |
Reproducible resistive switching behavior in sputtered CeO2 polycrystalline films | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Lin, C.-Y., Lee, D.-Y., Wang, S.-Y., Lin, C.-C., & Tseng, T.-Y. (2008). Reproducible resistive switching behavior in sputtered CeO2 polycrystalline films. SURFACE & COATINGS TECHNOLOGY, 203, 480–483. https://doi.org/10.1016/j.surfcoat.2008.07.004
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/149646